[Valvula] axl source - python axl missing
Francis Brosnan Blázquez
francis en aspl.es
Vie Mar 6 10:21:53 CET 2015
El vie, 06-03-2015 a las 10:00 +0100, Martin Thomas Schrott escribió:
> good morning francis,
Good morning Martin,
> on my system just the
> __init__.py file was copied to the folder and a .pyc file compiled.
> no further files in the python sites folder.
Uhmn....
> Wouldn't it be much easier for you to creeate a centos package than
> giving install support ;-) just joking.
Certainly!! hehe...
> I have no idea why the files where not copied, do you?
Ok, there must be some error or the files are just being copied in a
different place.
When you do a "make install", take a look throughout the logs it
generates to see the following
relevant part:
make[3]: Entering directory `/usr/src/axl-0.6.9.b5308.g5312/py-axl'
/bin/mkdir -p '/usr/local/lib/python2.6/site-packages/axl'
/bin/sh ../libtool --mode=install /usr/bin/install -c libpy_axl.la '/usr/local/lib/python2.6/site-packages/axl'
libtool: install: warning: relinking `libpy_axl.la'
libtool: install: (cd /usr/src/axl-0.6.9.b5308.g5312/py-axl; /bin/sh /usr/src/axl-0.6.9.b5308.g5312/libtool --tag CC --mode=relink gcc -g -O2 -lpthread -ldl -lutil -lm -lpython2.6 ../src/libaxl.la -o libpy_axl.la -rpath /usr/local/lib/python2.6/site-packages/axl py_axl.lo py_axl_doc.lo py_axl_error.lo py_axl_node.lo py_axl_attr_cursor.lo py_axl_dtd.lo py_axl_list.lo py_axl_hash.lo py_axl_stack.lo py_axl_stream.lo )
libtool: relink: gcc -shared -fPIC -DPIC .libs/py_axl.o .libs/py_axl_doc.o .libs/py_axl_error.o .libs/py_axl_node.o .libs/py_axl_attr_cursor.o .libs/py_axl_dtd.o .libs/py_axl_list.o .libs/py_axl_hash.o .libs/py_axl_stack.o .libs/py_axl_stream.o -Wl,-rpath -Wl,/usr/local/lib -lpthread -ldl -lutil -lm -lpython2.6 -L/usr/local/lib -laxl -O2 -Wl,-soname -Wl,libpy_axl.so.0 -o .libs/libpy_axl.so.0.0.0
libtool: install: /usr/bin/install -c .libs/libpy_axl.so.0.0.0T /usr/local/lib/python2.6/site-packages/axl/libpy_axl.so.0.0.0
libtool: install: (cd /usr/local/lib/python2.6/site-packages/axl && { ln -s -f libpy_axl.so.0.0.0 libpy_axl.so.0 || { rm -f libpy_axl.so.0 && ln -s libpy_axl.so.0.0.0 libpy_axl.so.0; }; })
libtool: install: (cd /usr/local/lib/python2.6/site-packages/axl && { ln -s -f libpy_axl.so.0.0.0 libpy_axl.so || { rm -f libpy_axl.so && ln -s libpy_axl.so.0.0.0 libpy_axl.so; }; })
libtool: install: /usr/bin/install -c .libs/libpy_axl.lai /usr/local/lib/python2.6/site-packages/axl/libpy_axl.la
libtool: install: /usr/bin/install -c .libs/libpy_axl.a /usr/local/lib/python2.6/site-packages/axl/libpy_axl.a
libtool: install: chmod 644 /usr/local/lib/python2.6/site-packages/axl/libpy_axl.a
libtool: install: ranlib /usr/local/lib/python2.6/site-packages/axl/libpy_axl.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin:/sbin" ldconfig -n /usr/local/lib/python2.6/site-packages/axl
----------------------------------------------------------------------
Libraries have been installed in:
/usr/local/lib/python2.6/site-packages/axl
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make install-exec-hook
make[4]: Entering directory `/usr/src/axl-0.6.9.b5308.g5312/py-axl'
site installation /usr/local/lib/python2.6/site-packages/axl prefix=..
install -d /usr/local/lib/python2.6/site-packages/axl
install -m 644 \
__init__.py \
/usr/local/lib/python2.6/site-packages/axl
make[4]: Leaving directory `/usr/src/axl-0.6.9.b5308.g5312/py-axl'
I highlighted bold the important parts where your "make install" should
leave your copy
of libpy_axl.a (.so, etc) along with your __init__.py files.
You can also send us the entire log produced by doing "make install" for
axl.
Let see with this details,
Best Regards,
PD: just let you know we are working on the port of Core-Admin
(http://www.core-admin.com)
to centOS...and as part of that effort, valvula and axl are components
used by Core-Admin..
...but I can't give you an estimated time to have it done :-)
> best regards,
> Martin
>
>
>
> Am 06.03.2015 09:21, schrieb Francis Brosnan Blázquez:
>
> >
> > El vie, 06-03-2015 a las 00:04 +0100, Martin Thomas Schrott
> > escribió:
> >
> > > Hi Francis,
> >
> >
> > Hi there Martin,
> >
> >
> > > thanks,okay one step further,axl now can be imported, but axl
> > > tries to import libpy_axl which cannot be found now. Where will
> > > this be located?:-)
> > >
> > > >>> import axl
> > > Traceback (most recent call last):
> > > File "<stdin>", line 1, in <module>
> > > File "/usr/local/lib/python2.7/site-packages/axl/__init__.py",
> > > line 5, in <module>
> > > from libpy_axl import *
> > > ImportError: No module named libpy_axl
> >
> >
> > Uhmn...that's odd :-?
> >
> >
> > > wouldn't it make sense to place this in the same directory?
> >
> >
> > Ok, it should be located in the same directory as the __init__.py
> > file that is failing to
> > import it, that is, in your case, it should be located
> > at /usr/local/lib/python2.7/site-packages/axl/
> >
> > I'm doing here some tests with a Centos 6.3 amd64 and I have them
> > installed:
> >
> >
> > >> ls -la /usr/local/lib/python2.6/site-packages/axl
> > total 464
> > drwxr-xr-x. 2 root root 4096 mar 6 09:16 .
> > drwxr-xr-x. 3 root root 4096 mar 5 18:00 ..
> > -rw-r--r--. 1 root root 107 mar 6 09:16 __init__.py
> > -rw-r--r--. 1 root root 223 mar 5 18:05 __init__.pyc
> > -rw-r--r--. 1 root root 298542 mar 6 09:16 libpy_axl.a
> > -rwxr-xr-x. 1 root root 1039 mar 6 09:16 libpy_axl.la
> > lrwxrwxrwx. 1 root root 18 mar 6 09:16 libpy_axl.so -> libpy_axl.so.0.0.0
> > lrwxrwxrwx. 1 root root 18 mar 6 09:16 libpy_axl.so.0 -> libpy_axl.so.0.0.0
> > -rwxr-xr-x. 1 root root 154549 mar 6 09:16 libpy_axl.so.0.0.0
> >
> >
> > If you run the same command but with your directory, what do you
> > get?
> > I mean, running ls -la /usr/local/lib/python2.7/site-packages/axl/
> >
> >
> > Let's see,
> > Best Regards,
> >
> >
> >
> > > cheers
> > > Martin
> > >
> > >
> > > Am 05.03.2015 18:48, schrieb Francis Brosnan Blázquez:
> > >
> > >
> > > >
> > > >
> > > > > Good morning Francis,
> > > >
> > > >
> > > > Hello there Martin,
> > > >
> > > >
> > > > > I installed python-devel and the log entries reflect your
> > > > > example. Everything regarding py_axl is enabled / yes and even
> > > > > the makefile was created.
> > > > > Only problem, the python module is not available and if I let
> > > > > me show all the changed files on the system, I can see, that
> > > > > no files where added to the python lib folders.
> > > >
> > > >
> > > > That's right,
> > > >
> > > >
> > > > > any further idea? This won't be a big problem for me, as I
> > > > > should be able to get the postfix config done manually, but I
> > > > > would like to solve the problem anyway, so we have a sample
> > > > > for users, that get into this issue in future.
> > > >
> > > >
> > > > Take a look at the other reply to see suggested solution. In
> > > > short, run the following
> > > > before running valvulad-mgr.py:
> > > >
> > > > >>
> > > > PYTHONPATH="/usr/local/lib/python2.6/site-packages/":"${PYTHONPATH}"
> > > > >> export PYTHONPATH
> > > > >> valvulad-mgr.py
> > > > INFO: run /usr/local/bin/valvulad-mgr.py --help to get
> > > > additional information
> > > >
> > > > More info about this can be found at:
> > > >
> > > > http://superuser.com/questions/247620/how-to-globally-modify-the-default-pythonpath-sys-path
> > > >
> > > > Best Regards,
> > > >
> > > >
> > > >
> > > > > cheers
> > > > > Martin
> > > > >
> > > > >
> > > > > Am 04.03.2015 um 18:23 schrieb Francis Brosnan Blázquez:
> > > > >
> > > > >
> > > > > > El mié, 04-03-2015 a las 14:41 +0100, Martin Thomas Schrott
> > > > > > escribió:
> > > > > >
> > > > > > > Hello Francis,
> > > > > >
> > > > > >
> > > > > > Hello Martin,
> > > > > >
> > > > > >
> > > > > > > today I went on with the setup, and as you suggested I
> > > > > > > tried a
> > > > > > > python import axl
> > > > > > >
> > > > > > > which results in an error, that no such module was
> > > > > > > available.
> > > > > >
> > > > > >
> > > > > > Ok,
> > > > > >
> > > > > >
> > > > > > > So even if everything installed successfully from your
> > > > > > > sources and the database already works "OK" the module for
> > > > > > > python is still missing.
> > > > > >
> > > > > >
> > > > > > Ok, the axl python module isn't fully required to have
> > > > > > valvula working. It is for the valvulad-mgr.py
> > > > > > manager which will help you to setup valvula connection with
> > > > > > postifix...but any of the work done
> > > > > > by this script can be done manually.
> > > > > >
> > > > > >
> > > > > > > any idea where that got lost? :-)Maybe it just got copied
> > > > > > > to a wrong path, I will have to check that.
> > > > > > >
> > > > > > > Am I right, that this is not really needed and just a tool
> > > > > > > to set the config up more easily?
> > > > > >
> > > > > >
> > > > > > That's right Martin. You don't needed to have valvula
> > > > > > working...however, it does help to have it
> > > > > > so you can easily connect valvula to postfix. If it is
> > > > > > already connected, you can perfectly leave
> > > > > > without it.
> > > > > >
> > > > > > Just for the record, when run ran the ./configure for Axl
> > > > > > library, what did it show for the following lighted lines?
> > > > > >
> > > > > >
> > > > > > Python includes: -I/usr/include/python2.6
> > > > > > -I/usr/include/python2.6
> > > > > > Python development headers status: yes
> > > > > > Python install dir
> > > > > > OK: /usr/lib/python2.6/dist-packages
> > > > > > Detected gcc compiler: gcc, adding options:
> > > > > > -Wstrict-prototypes -Wall -Werror -g -ansi
> > > > > > checking for pkg-config... yes
> > > > > > checking for doxygen... yes
> > > > > > Checking vasprintf support: yes
> > > > > > vasprintf support found
> > > > > > platform found: x86_64-unknown-linux-gnu
> > > > > > configure: creating ./config.status
> > > > > > Host detected: x86_64-unknown-linux-gnu
> > > > > > config.status: creating Makefile
> > > > > > config.status: creating Makefile.win
> > > > > > config.status: creating src/Makefile
> > > > > > config.status: creating ns/Makefile
> > > > > > config.status: creating doc/Makefile
> > > > > > config.status: creating doc/axl-doc.doxygen
> > > > > > config.status: creating babel/Makefile
> > > > > > config.status: creating test/Makefile
> > > > > > config.status: creating knife/Makefile
> > > > > > config.status: creating py-axl/Makefile
> > > > > > config.status: creating py-axl/__init__.py
> > > > > > config.status: creating py-axl/doc/conf.py
> > > > > > config.status: creating py-axl/doc/Makefile
> > > > > > config.status: creating axl.pc
> > > > > > config.status: creating axl-ns.pc
> > > > > > config.status: creating axl-babel.pc
> > > > > > config.status: creating config.h
> > > > > > config.status: config.h is unchanged
> > > > > > config.status: executing depfiles commands
> > > > > > config.status: executing libtool commands
> > > > > > config.status: executing axl_config.h commands
> > > > > > config.status: axl_config.h is unchanged
> > > > > > ------------------------------------------
> > > > > > -- LibAXL LIBRARY SETTINGS --
> > > > > > ------------------------------------------
> > > > > > Installation prefix: /usr
> > > > > > Compiler: gcc
> > > > > > Build Axl Namespace support: yes
> > > > > > Build Axl Library tests: yes
> > > > > > Build Axl Knife: yes
> > > > > > Build Axl Library debug log: yes
> > > > > > Build PyAxl: yes
> > > > > > Build Axl Library doc: enabled
> > > > > > vasprintf support: yes
> > > > > > ------------------------------------------
> > > > > > -- NOW TYPE: make; make install --
> > > > > > ------------------------------------------
> > > > > >
> > > > > >
> > > > > > The python support for axl is optional so I guess it wasn't
> > > > > > built without it. Maybe you try
> > > > > > to install python-devel package and rerun ./configure for
> > > > > > axl and check that above items
> > > > > > are enabled.
> > > > > >
> > > > > > If that's the case, after installing it, you should be able
> > > > > > to run "python" and then "import axl"
> > > > > > without any issue, and hence, you should be able to run
> > > > > > valvulad-mgr.py without any problem.
> > > > > >
> > > > > > Best Regards,
> > > > > >
> > > > > >
> > > > > > > Best,
> > > > > > > Martin
> > > > > > >
> > > > > > >
> > > > > > > Am 03.03.2015 um 15:27 schrieb Francis Brosnan Blázquez:
> > > > > > >
> > > > > > >
> > > > > > > > El mar, 03-03-2015 a las 15:24 +0100, Martin Thomas
> > > > > > > > Schrott escribió:
> > > > > > > >
> > > > > > > > > Hi Francis, hi Laurent,
> > > > > > > >
> > > > > > > >
> > > > > > > > Hi Martin,
> > > > > > > >
> > > > > > > >
> > > > > > > > > there is no package python-axl for CENTOS and
> > > > > > > > > libpython2.7 is called python-libs.
> > > > > > > >
> > > > > > > >
> > > > > > > > Ok, Laurent refes to the debian/ubuntu package
> > > > > > > > python-axl
> > > > > > > >
> > > > > > > > Because you did install axl from sources, you already
> > > > > > > > have it. That package, python-axl
> > > > > > > > provides the python module axl. You can check that you
> > > > > > > > have it by running:
> > > > > > > >
> > > > > > > > python
> > > > > > > > >>> import axl
> > > > > > > > # no failure should happen here
> > > > > > > >
> > > > > > > >
> > > > > > > > > beside that I was able to get everything installed
> > > > > > > > > now, after removing everything and starting from the
> > > > > > > > > beginning.
> > > > > > > >
> > > > > > > >
> > > > > > > > Perfect,
> > > > > > > >
> > > > > > > >
> > > > > > > > > Francis, here is how it works on CENTOS7 if you like
> > > > > > > > > to publish a working howto:
> > > > > > > > >
> > > > > > > > > how to install valvula on centos7
> > > > > > > > > yum install gcc
> > > > > > > > > yum install doxygen
> > > > > > > > > yum install mariadb
> > > > > > > > > yum install mariadb-devel
> > > > > > > > >
> > > > > > > > > wget
> > > > > > > > > http://www.aspl.es/xml/downloads/axl-0.6.9.b5308.g5312.tar.gz
> > > > > > > > > tar zxvf axl-*
> > > > > > > > > cd axl-*
> > > > > > > > > ./configure
> > > > > > > > > make
> > > > > > > > > make install
> > > > > > > > > export PKG_CONFIG_PATH='/usr/local/lib/pkgconfig'
> > > > > > > > >
> > > > > > > > > cd ~
> > > > > > > > > wget
> > > > > > > > > http://www.aspl.es/valvula/downloads/valvula-1.0.5.tar.gz
> > > > > > > > > tar xzvf valvula-1.*
> > > > > > > > > cd valvula-1.*
> > > > > > > > > ./configure
> > > > > > > > > make
> > > > > > > > > make install
> > > > > > > >
> > > > > > > >
> > > > > > > > Perfect. I'll update documentation with this notes,
> > > > > > > > Best Regards,
> > > > > > > >
> > > > > > > >
> > > > > > > > > thanks for your help.
> > > > > > > > >
> > > > > > > > > best wishes,
> > > > > > > > > Martin
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Am 03.03.2015 um 13:23 schrieb Francis Brosnan
> > > > > > > > > Blázquez:
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > > Hello Martin,
> > > > > > > > > >
> > > > > > > > > > For some reason, your pkg-config installation does
> > > > > > > > > > not want to use axl.pc files
> > > > > > > > > > located at /usr/local/lib/pkg-config
> > > > > > > > > >
> > > > > > > > > > Try the following. Uninstall it as it is,
> > > > > > > > > > reconfigure to with standard location and
> > > > > > > > > > reinstall again:
> > > > > > > > > >
> > > > > > > > > > >> cd axl-build-sources
> > > > > > > > > > >> make uninstall
> > > > > > > > > > >> make clean
> > > > > > > > > > >> ./configure --prefix=/usr --sysconfdir=/etc
> > > > > > > > > > >> make
> > > > > > > > > > >> make install
> > > > > > > > > >
> > > > > > > > > > After that, you should have a file located
> > > > > > > > > > at /usr/lib/pkgconfig/axl.pc that will enable
> > > > > > > > > > your system to successfully run the following
> > > > > > > > > > command:
> > > > > > > > > >
> > > > > > > > > > >> pkg-config --libs --cflags axl
> > > > > > > > > > -I/usr/include/axl -laxl -lm
> > > > > > > > > >
> > > > > > > > > > After that, rerun valvula configuration to see it if
> > > > > > > > > > works.
> > > > > > > > > >
> > > > > > > > > > Alternatively (depending on your needs), you can try
> > > > > > > > > > setting up pkg-config paths
> > > > > > > > > > so it loads configurations found
> > > > > > > > > > at /usr/local/lib/pkg-config by running:
> > > > > > > > > >
> > > > > > > > > > >> export
> > > > > > > > > > PKG_CONFIG_PATH=/usr/lib/pkg-config:/usr/local/lib/pkg-config
> > > > > > > > > >
> > > > > > > > > > ...and then, rerun valvula configuration..
> > > > > > > > > >
> > > > > > > > > > Best Regards,
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > Hello Francis,
> > > > > > > > > > >
> > > > > > > > > > > okay, axl seems to have been installed again,
> > > > > > > > > > > there are some files in /usr/local/lib ...libaxl*
> > > > > > > > > > > What I did:
> > > > > > > > > > > uninstall axl, download the src, extract,
> > > > > > > > > > > configure, make, make install.
> > > > > > > > > > >
> > > > > > > > > > > Now, valvula does not find axl anymore:
> > > > > > > > > > >
> > > > > > > > > > > checking for AXL... no
> > > > > > > > > > > configure: error: Package requirements (axl >=
> > > > > > > > > > > 0.6.4) were not met:
> > > > > > > > > > >
> > > > > > > > > > > No package 'axl' found
> > > > > > > > > > >
> > > > > > > > > > > Consider adjusting the PKG_CONFIG_PATH environment
> > > > > > > > > > > variable if you
> > > > > > > > > > > installed software in a non-standard prefix.
> > > > > > > > > > >
> > > > > > > > > > > Alternatively, you may set the environment
> > > > > > > > > > > variables AXL_CFLAGS
> > > > > > > > > > > and AXL_LIBS to avoid the need to call pkg-config.
> > > > > > > > > > > See the pkg-config man page for more details.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > so there still seems to be something messed up in
> > > > > > > > > > > one of the sources.
> > > > > > > > > > >
> > > > > > > > > > > Thanks,
> > > > > > > > > > > Martin
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > Am 03.03.2015 um 12:24 schrieb Francis Brosnan
> > > > > > > > > > > Blázquez:
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > El mar, 03-03-2015 a las 12:12 +0100, Martin
> > > > > > > > > > > > Thomas Schrott escribió:
> > > > > > > > > > > >
> > > > > > > > > > > > > Thanks Francis,
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Hi Martin,
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > > for the quick help and fixed version. Your
> > > > > > > > > > > > > welcome, interesting, that nobody did report
> > > > > > > > > > > > > the missing files until now :-)
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > I guess someone must be the first :-)
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > > configure works fine now. sadly, now we have
> > > > > > > > > > > > > another issue, think this time it is related
> > > > > > > > > > > > > to the lib axl - here a short extract of the
> > > > > > > > > > > > > make commands result:
> > > > > > > > > > > > >
> > > > > > > > > > > > > --
> > > > > > > > > > > > > /usr/bin/ld: /usr/lib64/libaxl.a(axl_error.o):
> > > > > > > > > > > > > relocation R_X86_64_32 against
> > > > > > > > > > > > > `.rodata.str1.1' can not be used when making a
> > > > > > > > > > > > > shared object; recompile with -fPIC
> > > > > > > > > > > > > /usr/lib64/libaxl.a: could not read symbols:
> > > > > > > > > > > > > Bad value
> > > > > > > > > > > > > collect2: error: ld returned 1 exit status
> > > > > > > > > > > > > make[2]: *** [libvalvula.la] Error 1
> > > > > > > > > > > > > make[2]: Leaving directory
> > > > > > > > > > > > > `/root/valvula-1.0.5/lib'
> > > > > > > > > > > > > make[1]: *** [all-recursive] Error 1
> > > > > > > > > > > > > make[1]: Leaving directory
> > > > > > > > > > > > > `/root/valvula-1.0.5'
> > > > > > > > > > > > > ...
> > > > > > > > > > > > > --
> > > > > > > > > > > > >
> > > > > > > > > > > > > we used a pkg from pkgs.org to install axl on
> > > > > > > > > > > > > our CENTOS7 system, as we did not find any
> > > > > > > > > > > > > files on your page, for linux systems. Our
> > > > > > > > > > > > > version is:
> > > > > > > > > > > > >
> > > > > > > > > > > > > axl-0.6.8-20120112.1.x86_64
> > > > > > > > > > > > >
> > > > > > > > > > > > > Any ideas whats going on?
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Given the error, it seems the quality of the
> > > > > > > > > > > > package provided by pkgs.org is not good (I
> > > > > > > > > > > > wasn't aware they were available there). I
> > > > > > > > > > > > recommend you to install axl with the usual
> > > > > > > > > > > > standard vodoo (it'll work):
> > > > > > > > > > > >
> > > > > > > > > > > > >> wget
> > > > > > > > > > > > http://www.aspl.es/xml/downloads/axl-0.6.9.b5308.g5312.tar.gz
> > > > > > > > > > > > >> tar zxvf axl-0.6.9.b5308.g5312.tar.gz
> > > > > > > > > > > > >> cd axl-0.6.9.b5308.g5312
> > > > > > > > > > > > >> ./configure
> > > > > > > > > > > > >> make
> > > > > > > > > > > > >> make install
> > > > > > > > > > > >
> > > > > > > > > > > > ...And of course, please, remove first that
> > > > > > > > > > > > axl-0.6.8 package,
> > > > > > > > > > > >
> > > > > > > > > > > > After that, you shoul be able to build valvula
> > > > > > > > > > > > without any issue,
> > > > > > > > > > > >
> > > > > > > > > > > > Best Regards,
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > > Thanks again,
> > > > > > > > > > > > > martin
> > > > > > > > > > > > >
> > > > > > > > > > > > > Am 03.03.2015 um 11:03 schrieb Francis Brosnan
> > > > > > > > > > > > > Blázquez:
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > > Hi there Martin,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Thanks for reporting. I've checked and fixed
> > > > > > > > > > > > > > all missing references for the dist .targz
> > > > > > > > > > > > > > file. Please, have a reference to the next
> > > > > > > > > > > > > > stable release that includes this fixings
> > > > > > > > > > > > > > as well as others:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > http://www.aspl.es/valvula/downloads/valvula-1.0.5.tar.gz
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Let us know your progress,
> > > > > > > > > > > > > > Best Regards,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > dear all,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > we try to install valvula on a centos7 system.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > we installed the axl and the gcc to meet the prerequisites. MYSQL-devel
> > > > > > > > > > > > > > > (mariadb-devel) also exists.
> > > > > > > > > > > > > > > After that we downloaded the src file of the current release and
> > > > > > > > > > > > > > > extracted it, following the instructions.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > But there seems to be an error in the source package, because
> > > > > > > > > > > > > > > ./configure
> > > > > > > > > > > > > > > gives only the following result:
> > > > > > > > > > > > > > > config.status: error: cannot find input file: `doc/valvula.doxygen.in'
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > may the doc files be missing in the src file? the option to disable
> > > > > > > > > > > > > > > (enable) valvula-doc does not work either, it gives the same error
> > > > > > > > > > > > > > > message, when I try to disable doc creation.
> > > > > > > > > > > > > > > Wonder how others could install valvula, am I doing something wrong?
> > > > > > > > > > > > > > > hope you can help us!
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > cheers,
> > > > > > > > > > > > > > > Martin
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > > > > Valvula mailing list
> > > > > > > > > > > > > > > Valvula en lists.aspl.es
> > > > > > > > > > > > > > > http://lists.aspl.es/cgi-bin/mailman/listinfo/valvula
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > --
> > > > > > > > > > > > > > Francis Brosnan Blázquez <francis.brosnan en aspl.es>
> > > > > > > > > > > > > > ASPL
> > > > > > > > > > > > > > 91 134 14 22 - 91 134 14 45 - 91 116 07 57
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > AVISO LEGAL
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Este mensaje se dirige exclusivamente a su destinatario. Los datos
> > > > > > > > > > > > > > incluidos en el presente correo son confidenciales y sometidos a secreto
> > > > > > > > > > > > > > profesional, se prohíbe divulgarlos, en virtud de las leyes vigentes. Si
> > > > > > > > > > > > > > usted no lo es y lo ha recibido por error o tiene conocimiento del mismo
> > > > > > > > > > > > > > por cualquier motivo, le rogamos que nos lo comunique por este medio y
> > > > > > > > > > > > > > proceda a destruirlo o borrarlo.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > En virtud de lo dispuesto en la Ley Orgánica 15/1999, de 13 de
> > > > > > > > > > > > > > diciembre, de Protección de Datos de Carácter Personal, le informamos de
> > > > > > > > > > > > > > que sus datos de carácter personal, recogidos de fuentes accesibles al
> > > > > > > > > > > > > > público o datos que usted nos ha facilitado previamente, proceden de
> > > > > > > > > > > > > > bases de datos propiedad de Advanced Software Production Line, S.L.
> > > > > > > > > > > > > > (ASPL). No obstante, usted puede ejercitar sus derechos de acceso,
> > > > > > > > > > > > > > rectificación, cancelación y oposición dispuestos en la mencionada Ley
> > > > > > > > > > > > > > Orgánica, notificándolo por escrito a:
> > > > > > > > > > > > > > ASPL - Protección Datos, C/Antonio Suárez 10 A-102, 28802, Alcalá de
> > > > > > > > > > > > > > Henares (Madrid).
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > Francis Brosnan Blázquez <francis.brosnan en aspl.es>
> > > > > > > > > > > > ASPL
> > > > > > > > > > > > 91 134 14 22 - 91 134 14 45 - 91 116 07 57
> > > > > > > > > > > >
> > > > > > > > > > > > AVISO LEGAL
> > > > > > > > > > > >
> > > > > > > > > > > > Este mensaje se dirige exclusivamente a su destinatario. Los datos
> > > > > > > > > > > > incluidos en el presente correo son confidenciales y sometidos a secreto
> > > > > > > > > > > > profesional, se prohíbe divulgarlos, en virtud de las leyes vigentes. Si
> > > > > > > > > > > > usted no lo es y lo ha recibido por error o tiene conocimiento del mismo
> > > > > > > > > > > > por cualquier motivo, le rogamos que nos lo comunique por este medio y
> > > > > > > > > > > > proceda a destruirlo o borrarlo.
> > > > > > > > > > > >
> > > > > > > > > > > > En virtud de lo dispuesto en la Ley Orgánica 15/1999, de 13 de
> > > > > > > > > > > > diciembre, de Protección de Datos de Carácter Personal, le informamos de
> > > > > > > > > > > > que sus datos de carácter personal, recogidos de fuentes accesibles al
> > > > > > > > > > > > público o datos que usted nos ha facilitado previamente, proceden de
> > > > > > > > > > > > bases de datos propiedad de Advanced Software Production Line, S.L.
> > > > > > > > > > > > (ASPL). No obstante, usted puede ejercitar sus derechos de acceso,
> > > > > > > > > > > > rectificación, cancelación y oposición dispuestos en la mencionada Ley
> > > > > > > > > > > > Orgánica, notificándolo por escrito a:
> > > > > > > > > > > > ASPL - Protección Datos, C/Antonio Suárez 10 A-102, 28802, Alcalá de
> > > > > > > > > > > > Henares (Madrid).
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > Francis Brosnan Blázquez <francis.brosnan en aspl.es>
> > > > > > > > > > ASPL
> > > > > > > > > > 91 134 14 22 - 91 134 14 45 - 91 116 07 57
> > > > > > > > > >
> > > > > > > > > > AVISO LEGAL
> > > > > > > > > >
> > > > > > > > > > Este mensaje se dirige exclusivamente a su destinatario. Los datos
> > > > > > > > > > incluidos en el presente correo son confidenciales y sometidos a secreto
> > > > > > > > > > profesional, se prohíbe divulgarlos, en virtud de las leyes vigentes. Si
> > > > > > > > > > usted no lo es y lo ha recibido por error o tiene conocimiento del mismo
> > > > > > > > > > por cualquier motivo, le rogamos que nos lo comunique por este medio y
> > > > > > > > > > proceda a destruirlo o borrarlo.
> > > > > > > > > >
> > > > > > > > > > En virtud de lo dispuesto en la Ley Orgánica 15/1999, de 13 de
> > > > > > > > > > diciembre, de Protección de Datos de Carácter Personal, le informamos de
> > > > > > > > > > que sus datos de carácter personal, recogidos de fuentes accesibles al
> > > > > > > > > > público o datos que usted nos ha facilitado previamente, proceden de
> > > > > > > > > > bases de datos propiedad de Advanced Software Production Line, S.L.
> > > > > > > > > > (ASPL). No obstante, usted puede ejercitar sus derechos de acceso,
> > > > > > > > > > rectificación, cancelación y oposición dispuestos en la mencionada Ley
> > > > > > > > > > Orgánica, notificándolo por escrito a:
> > > > > > > > > > ASPL - Protección Datos, C/Antonio Suárez 10 A-102, 28802, Alcalá de
> > > > > > > > > > Henares (Madrid).
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Francis Brosnan Blázquez <francis.brosnan en aspl.es>
> > > > > > > > ASPL
> > > > > > > > 91 134 14 22 - 91 134 14 45 - 91 116 07 57
> > > > > > > >
> > > > > > > > AVISO LEGAL
> > > > > > > >
> > > > > > > > Este mensaje se dirige exclusivamente a su destinatario. Los datos
> > > > > > > > incluidos en el presente correo son confidenciales y sometidos a secreto
> > > > > > > > profesional, se prohíbe divulgarlos, en virtud de las leyes vigentes. Si
> > > > > > > > usted no lo es y lo ha recibido por error o tiene conocimiento del mismo
> > > > > > > > por cualquier motivo, le rogamos que nos lo comunique por este medio y
> > > > > > > > proceda a destruirlo o borrarlo.
> > > > > > > >
> > > > > > > > En virtud de lo dispuesto en la Ley Orgánica 15/1999, de 13 de
> > > > > > > > diciembre, de Protección de Datos de Carácter Personal, le informamos de
> > > > > > > > que sus datos de carácter personal, recogidos de fuentes accesibles al
> > > > > > > > público o datos que usted nos ha facilitado previamente, proceden de
> > > > > > > > bases de datos propiedad de Advanced Software Production Line, S.L.
> > > > > > > > (ASPL). No obstante, usted puede ejercitar sus derechos de acceso,
> > > > > > > > rectificación, cancelación y oposición dispuestos en la mencionada Ley
> > > > > > > > Orgánica, notificándolo por escrito a:
> > > > > > > > ASPL - Protección Datos, C/Antonio Suárez 10 A-102, 28802, Alcalá de
> > > > > > > > Henares (Madrid).
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > Francis Brosnan Blázquez <francis.brosnan en aspl.es>
> > > > > > ASPL
> > > > > > 91 134 14 22 - 91 134 14 45 - 91 116 07 57
> > > > > >
> > > > > > AVISO LEGAL
> > > > > >
> > > > > > Este mensaje se dirige exclusivamente a su destinatario. Los datos
> > > > > > incluidos en el presente correo son confidenciales y sometidos a secreto
> > > > > > profesional, se prohíbe divulgarlos, en virtud de las leyes vigentes. Si
> > > > > > usted no lo es y lo ha recibido por error o tiene conocimiento del mismo
> > > > > > por cualquier motivo, le rogamos que nos lo comunique por este medio y
> > > > > > proceda a destruirlo o borrarlo.
> > > > > >
> > > > > > En virtud de lo dispuesto en la Ley Orgánica 15/1999, de 13 de
> > > > > > diciembre, de Protección de Datos de Carácter Personal, le informamos de
> > > > > > que sus datos de carácter personal, recogidos de fuentes accesibles al
> > > > > > público o datos que usted nos ha facilitado previamente, proceden de
> > > > > > bases de datos propiedad de Advanced Software Production Line, S.L.
> > > > > > (ASPL). No obstante, usted puede ejercitar sus derechos de acceso,
> > > > > > rectificación, cancelación y oposición dispuestos en la mencionada Ley
> > > > > > Orgánica, notificándolo por escrito a:
> > > > > > ASPL - Protección Datos, C/Antonio Suárez 10 A-102, 28802, Alcalá de
> > > > > > Henares (Madrid).
> > > > >
> > > > >
> > > >
> > > >
> > > > --
> > > > Francis Brosnan Blázquez <francis.brosnan en aspl.es>
> > > > ASPL
> > > > 91 134 14 22 - 91 134 14 45 - 91 116 07 57
> > > >
> > > > AVISO LEGAL
> > > >
> > > > Este mensaje se dirige exclusivamente a su destinatario. Los datos
> > > > incluidos en el presente correo son confidenciales y sometidos a secreto
> > > > profesional, se prohíbe divulgarlos, en virtud de las leyes vigentes. Si
> > > > usted no lo es y lo ha recibido por error o tiene conocimiento del mismo
> > > > por cualquier motivo, le rogamos que nos lo comunique por este medio y
> > > > proceda a destruirlo o borrarlo.
> > > >
> > > > En virtud de lo dispuesto en la Ley Orgánica 15/1999, de 13 de
> > > > diciembre, de Protección de Datos de Carácter Personal, le informamos de
> > > > que sus datos de carácter personal, recogidos de fuentes accesibles al
> > > > público o datos que usted nos ha facilitado previamente, proceden de
> > > > bases de datos propiedad de Advanced Software Production Line, S.L.
> > > > (ASPL). No obstante, usted puede ejercitar sus derechos de acceso,
> > > > rectificación, cancelación y oposición dispuestos en la mencionada Ley
> > > > Orgánica, notificándolo por escrito a:
> > > > ASPL - Protección Datos, C/Antonio Suárez 10 A-102, 28802, Alcalá de
> > > > Henares (Madrid).
> > >
> > >
> >
> >
>
>
------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: <http://lists.aspl.es/pipermail/valvula/attachments/20150306/79928968/attachment-0001.html>
Más información sobre la lista de distribución Valvula